Your IP: 52.91.90.122  Your status: 
unprotected

DNS leak protection


You can read about DNS leak here.
At EnableVPN, we run our own DNS on every Server for absolute Anonymity.

Windows

These instructions are made for Windows 10 and can also be used by different versions of Windows as they are pretty similar.
  1. Open Control panel.
  2. Click Network and Internet > Network and Sharing Center > Change adapter settings.
  3. Double-click on the connection you want to use.
  4. Click on Properties. Enter your admin password if it requires you.
  5. Choose:
    - Internet Protocol Version 4 (TCP/IPv4) if you want to configure for IPv4

    and click on Properties.
  6. If there are IP addresses entered in Preferred DNS server and Alternate DNS server, write those down in case you want to change back later.
  7. Click Use the following IP addresses. and enter:
    - For IPv4 – 10.41.0.1 as Preferred DNS server and 10.80.0.1 as Alternate DNS server.
  8. Click on OK and restart your connection.

MacOS

These instructions are made for Max OS X 9.4 and can also be used by different versions of OS X as they are pretty similar.
  1. Click on System Preferences in the Apple menu and then on Network.
  2. If the icon on the lower-left corner is displayed as locked, click on it and enter your password.
  3. Click on the connection you want to use.
  4. Click on Advanced..., and then on the DNS tab.
  5. Write down the IP addresses in case you want to change them back later.
  6. Click on the plus icon in the left row and enter:
    For IPv4 – 10.41.0.1 and 10.80.0.1
  7. Click OK.

Linux(Debian)

  1. Edit /etc/resolv.conf:

    /etc/resolv.conf
  2. If you see any lines containing nameserver, then write them down in case you want to change back later.
  3. Replace or enter the nameserver lines:
    For IPv4 – nameserver 10.41.0.1 and nameserver 10.80.0.1
  4. Save the file.
  5. Restart your internet connections.
If you’re using DHCP, you need to edit the configuration file for the software.
  1. Make a copy of /etc/resolv.conf:

    sudo cp /etc/resolv.conf /etc/resolv.conf.auto
  2. Edit /etc/dhcp3/dhclient.conf:

    /etc/dhcp3/dhclient.conf
  3. If you see any lines containing nameserver, then write them down in case you want to change back later.
  4. Replace or enter the nameserver lines:
    For IPv4 – prepend domain-name-servers 10.41.0.1, 10.80.0.1;
  5. Save the file.
  6. Restart your internet connections.